Mums Tips

Renovating a home? How to budget for a new central heating system without blowing the plan

Image credit:

Putting in a new kitchen is on everyone’s renovation list. Brand new bathrooms as well. What about central heating? This is where most people think they can overlook it until they lift up some floorboards.

Questions such as: Will I need to keep the old pipework? How many radiators will I need? Do I need to move my boiler?

Make sure you have answers to these before you start thinking about your new home. Make sure you factor central heating into your renovation budget.

Image credit: unsplash.com

Consider Your Heating Requirements

There are different types of central heating jobs. Some properties will need to replace their entire system; others may just require a new boiler. Or even new radiators, controls, and pipework around their property.

Firstly, make a mental note of what your current boiler looks like, whether there are areas of your house that are colder than others, how many bathrooms you have, and what renovations you are planning to do to your property.

Once you have done this, speak to your heating engineer about your situation. They can look at your current setup and how much each room will need to heat. From there, they can identify what can be kept and what may not be suitable for your new property.

If you just get a price for a new boiler, this won’t help you estimate what you’ll need for your new room/extension. There may be certain aspects that you can keep, which will save you money, but only if it’s suitable for your property and new central heating system.

Just because your current boiler works doesn’t mean it’s the right one for your renovation. There may be a radiator in a room, but it’s too small to fit your new extended space.

Calculate Central Heating Installation Cost

Your price for central heating may vary depending on what your price includes. It could include a central heating source, new radiators, pipework, controls, labour and checks. However, if you’re renovating your home, it may not include the work needed to get your home back to how it was previously.

Have a look at myjobquote.co.uk/costs/installing-central-heating to help give you an idea of what to expect. This can allow you to compare prices between local businesses and know what you need included.

Try to calculate your costs into 4 areas,

  • Heating system – this would include your boiler, radiators, controls, etc.
  • Labour – fitting your new central heating, adding new pipework, flushing, testing, etc.
  • Rebuilding – floor, plaster, box in, redecorating, etc.
  • Extra costs – you may need electricians, moving flue, hot water cylinder, removing old system, etc.

Ensure that your central heating engineer includes all costs, what they don’t, and what is unknown. It can sometimes state that pipework is included, but if they haven’t checked what your route will look like, it can cause budget overruns.

Among owner-occupiers who were unlikely to install at least one of the four low-carbon heating systems, 51% cited installation cost as a concern in the Winter 2025 DESNZ survey.

By calculating what you need, you can see what your unknown costs could be.

Decide What System Of Central Heating You Want

Having a cheaper boiler may seem like it’s saving you money, but there could be more factors to consider when it comes to renovating.

If you’re replacing your boiler, you may have suitable pipework around your home; replacing the boiler may be one option. However, you could consider a heat pump if you’re looking to insulate your property.

Once you have your quotes, you can look into what system of central heating is best for your property. You may be able to install a heat pump in an older property, but you will need to make sure you have suitable radiators and the amount of heat that it will need to output.

Another thing to note is that if you’re installing insulation, your house will be warmer, which can affect how much your central heating has to work.

Before you decide on your new central heating, make sure you know how much you’re going to insulate and what type. If you have decided on a boiler, and then want to add lots of insulation, you may need to reconsider.

There are grants that you can apply for when installing a heat pump, such as the Boiler Upgrade Scheme, which provides £7,500 to £1,500 for an eligible air-to-water or ground source heat pump in England and Wales. If you currently have an oil or LPG boiler, you can receive an additional £7,500 by the 31st March 2027, but this does not apply if your house is on mains gas.

There are pros and cons to each system; make sure you weigh them up and factor in the running costs.

Factor Central Heating Into Your Renovation Timeline

Depending on how you’re renovating, it may be easier to budget for your central heating installation if you plan ahead.

For example, if you’re replacing your flooring, you may want to run your new pipework under the floor. You can save yourself money if you do this, rather than doing it after you have replaced your flooring.

It’s best to factor your central heating in early on, along with your new kitchen, bathrooms and electrics. Once you have worked out where your new radiators will go, you can fit your new windows, furniture, etc.

  • Decide on room layouts, insulation, and what you want to heat
  • Know where you want your pipework to run, and where you want your new heating system located
  • Do your initial pipework
  • Replace floor/walls, once the above is done
  • Fit, test, and check that your central heating is working

You will need to discuss this with your heating engineer, and if you’re having other contractors do your rebuild, they will need to coordinate with one another.

Also, consider the time that you won’t have heating, or possibly hot water, if you’re living in the property during the time.

Get Multiple Quotes

As always, get multiple quotes for your central heating, so you can compare prices.

Compare what each company is offering: are they installing the same type of central heating, what size radiators, where your pipework will go, what type of controls, will it include extra costs, etc.

Always ask if VAT is included, if they will remove your old heating, cost of disposal, tests, etc. If something unexpected occurs, how much will they charge you?

If the work involves gas, ensure the engineer is Gas Safe registered and qualified for that work, and has the qualifications to do the work.

In England, some heating work must be notified to building control or self-certified by a suitably registered installer. Ask who will handle the paperwork if you live in England. Depending on where you’re located, you may have to follow local laws, so make sure you know what applies to you.

A higher quote can be easier to manage if it covers the full job, while a cheaper one has major exclusions, so you may end up trying to do everything on the cheap and not include everything.

Keep Your Budget

Always have a contingency, especially if your property is old; you don’t know how the pipework may look, if there are any leaks, etc.

Try not to overspend on fancy radiators or smart controls; that could go towards your renovation budget.

Have a spreadsheet that states your central heating budget, quote, changes, and how much you have paid and left to spend.

If something unexpected occurs, make sure you know what the price is, and who will pay for it. You don’t want to be charged for the same wall repair by both the plumber and plasterer.

You don’t have to stress about budgeting for your central heating; just know what your home requires, and get as many quotes as possible.

Don’t forget to leave room for the unexpected.